Oraguard200
Description
Oraguard 200 Laminating Film Used with Orajet 1917 Desktop Inkjet Printable
2.5-mil, soft PVC film with a UV extension factor of one year. Available in gloss, semi-gloss or matte finish.
Release Liner
55# silicone-coated paper
Adhesive
Clear, water-based, permanent adhesive
Area of Use
An economy cold laminate for protection of indoor and outdoor digital print applications. Flat application ONLY
Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) : 2 years
Note
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application inform
No products in this collection