Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Application instructions (home iron)
• Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 10-15 seconds• If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds• Peel carrier hot or cold
Application Instructions (heat press)• Cut in reverse• Weed excess material• Preheat garment for 2-3 seconds• Apply design at 305°F/150°C• Use medium pressure for 10-15 seconds• Peel carrier hot or cold
Laundering:
Wait 24 hours before 1st washMachine wash warm or cold / mild detergentDry on normal dryer settingDo not dry clean
Cricut:
Blade: StandardSetting: Iron-on
Silhouette Cameo:
Blade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8Force: 6
Scan N Cut:
Blade: Standard, 2Cut Speed: 1Cut Pressure: 1
Roland GS/GX-24:
Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/s
Graphtec:
Blade: 45°Gram Force: 8-9Tool: CB09U+0Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
Blade: 45°/60°Gram Force: 80-85Speed: 300mm/s*Blade Advancing Varies
Titan 2 & 3:
Blade: 45°/60°Gram Force: 60-65Speed: 300mm/s*Blade Advancing Varies
- $5.50 CAD
$4.75 CAD- $5.50 CAD
- Unit price
- per
Save $-0.75
Please hurry! Only -611 left in stock
Limited-Time Offers, End in:
151D
8H
23M
0S
10 customers are viewing this product
Couldn't load pickup availability
Free Shipping
Free standard shipping on orders over $199
Free Returns
Learn More.